SP Revival Series
SP Revival 7K-15K
Installing water pumps has been a challenge in areas that lack AC electrical power, making irrigation and water supply difficult in remote regions.
SP Revival Series supplies AC power to any conventional pump from the solar panels.
SP Revival Series supplies AC power to any conventional pump from the solar panels.
Zero operating cost and maintenance-free make it the best solar option for orchard, garden, and farm irrigation.
- Built-in MPPT solar controller
- Design for three-phase motors
- Multiple protections and self diagnosis
- Soft-start Function prevents water hammer effect
- Comprehensive LCD & LED indicators
- Remote Monitioring by the RS-485 communication interface
MODEL | SP7000 Revival | SP10000 Revival | SP15000 Revival |
Rated Power | 7500W | 11000W | 15000W |
Recommended Pump Capacity | 3~9HP | 10~14HP | 10~20HP |
AC OUTPUT | |||
AC Voltage Regulation (Batt. Mode) | 3 × 380/400/415/440vac | ||
Efficiency | > 97% | ||
Maximum Output Current | 15A | 22A | 29A |
Motor Type | Three-phase asynchronous motor | ||
Frequency Accuracy | ± 0.2% | ||
PV INPUT | |||
Maximum PV Array Power | 12000W | 17600W | 24000W |
Maximum DC Voltage | 800 VDC | ||
Start-up Voltage | 250 VDC | ||
MPPT Voltage Range | 250 ~ 780 VDC | ||
Number of MPPT Controller | 1 | ||
Maximum Input Current | 14.5 A | 22A | 29A |
Protection | |||
Protection | Over-voltage / under-voltage / over-current / surge / over - Temperature / short circuit protection | ||
PHYSICAL | |||
Dimension (D × W× H) | 110 × 230 × 342 mm | 205 × 218 × 320 mm | |
Net Weight | 6kg | 6.5kg | 6kg |
Ingress Protection Rating | IP20 | ||
INTERFACE | |||
Communication Port | RS232 / RS485 | ||
OPERATING ENVIRONMENT | |||
Humidity | < 95% Relative Humidity (Non condensing) | ||
Operating Temperature | Full load: - 20°C - 45°C Power derating: 46°C - 60°C |