Solar Inverter For Water Pump
SP7000-15000 Revival
HYBRID solar INVERTER
with charger
SP5000-8000-SW
ECONOMICAL HYBRID/OFF-GRID SOLAR INVERTER WITH CHARGER(PWM&MPPT)
SP1000-5000 Initial-M/-M ll
ECONOMICAL HYBRID/OFF-GRID SOLAR INVERTER WITH CHARGER(PWM&MPPT)
SP1000-3000 Power One
High-Efficiency Hybrid /
Off-Grid solar Inverter
with charger (PWM&MPPT)
SP5000 Brilliant Ultra
High-Efficiency Hybrid /
Off-Grid solar Inverter
with charger (PWM&MPPT)
SP6000 Brilliant Ultra II
ECONOMICAL HYBRID SOLAR INVERTER WITH CHARGER
SP1200-5000 Handy
ECONOMICAL HYBRID SOLAR INVERTER WITH CHARGER
SP3500-5500 Handy
ECONOMICAL HYBRID SOLAR INVERTER WITH CHARGER
SP4000-6000 Handy Plus
ECONOMICAL HYBRID SOLAR INVERTER WITH CHARGER
SP5500 Handy Plus II
ECONOMICAL HYBRID SOLAR INVERTER WITH CHARGER
SP6000-11000 Handy Ultra
GRID TIE SOLAR INVERTER (HYBRID + OFF-GRID)
SP6000 Handy Grid
Grid-tie Hybrid Solar Inverter (Split 2 phase 110/220V)
SP6000 Handy Grid II
ECONOMICAL HYBRID SOLAR INVERTER WITH CHARGER
SP5000 IP
GRID TIE SOLAR INVERTER WITH ENERGY STORAGE (HYBRID + OFF-GRID)
SP5000-8000 IP Plus
GRID TIE SOLAR INVERTER WITH ENERGY STORAGE (HYBRID + OFF-GRID)
SP6000-10000 IP Grid
True Hybrid Solar Inverter with Energy Storage
(on grid+off grid)
SP4000-15000 Premium
True Hybrid Solar Inverter with Energy Storage
(on grid+off grid)
SP30000 Premium Plus
Solar Inverter With Charger (MPPT)
SP5000 Regal/SP6000 Regal Ultra
Small Inverter
SP1000 Senior
Small Inverter
SP300-SP600 Junior
Solar Charger MPPT
SC-3KW MPPT
Solar Charger MPPT
SC-20-40 MPPT
Solar Charger PWM
SC-10-20 SM / SM-Z
Solar Charger PWM with LCD
SC-20-6048MAX
Battery Management System
BMS Card / Box
|
|
SP-SW Series
SP5000/6000/8000-SW
Strong DC/AC transformer design with higher efficiency, enjoy the stability and reliability all the time.
|
|
| |
| |
FEATURES
• Compatible with both linear and non-linear load
• Controllable & Removable panel with LCD
• DC start and automatic self-diagnostic function
• Designed to operate under harsh environment
• Heat dissipation design
• 3U 19" Rack-Mounted Design or Wall-Mounted Design
• Pre-settable Parameters
• 24hrs operation under inverter mode
• THD less than 3%
• DC/AC transformer design
APPLICATION DIAGRAM
SPECIFICATIONS
| MODEL |
SP5000-SW |
SP6000-SW |
SP8000-SW |
| Capacity |
5KVA/4000W |
6KVA/6000W |
8KVA/8000W |
| AC INPUT (FROM ARRAY) |
| Nominal Voltage |
120 Vac or 230 Vac |
230 Vac |
| Voltage Range |
Acceptable Voltage Range |
60~135 Vac or 120~270 Vac |
120~270 Vac |
| Low Voltage Transfer |
60 Vac ±2% ; 120 Vac ±3% |
120 Vac ±2% |
| Low Voltage Return |
65 Vac ±2% ; 130 Vac ±3% |
130 Vac ±2% |
| High Voltage Transfer |
135 Vac ±% ; 270 Vac ±3% |
270 Vac ±2% |
| High Voltage Return |
130 Vac ±2% ; 260 Vac ±3% |
260 Vac ±2% |
| Frequency |
50Hz or 60Hz |
| DC INPUT (FROM ARRAY) |
| Nominal Voltage |
24V |
48V |
| Charger Voltage |
27.6V |
55.2V |
| Solar Maxmum Peak Voltage |
50V |
100V |
| Start-up Voltage |
24V |
44V |
| Polarity Protect |
Yes |
| Backflow Protect |
Yes |
| Maximum Charge Current |
40A |
| OUTPUT |
| Voltage |
110/115/120Vac |
220/230/240Vac |
| 220/230/240Vac |
| Voltage Regulation(Battery Mode) |
<3% RMS for entire battery voltage range |
| Frequency Regulation |
Line Mode |
Synchronized to AC Main |
| Battery Mode |
50Hz or 60Hz ±0.1Hz |
| Power Factor |
0.8 |
1 |
| Wave Form |
Pure Sine Wave |
| Overload Protection |
Line Mode |
>110%, then buzzer alarms and amber LED blinks continuously |
| Battery Mode |
110%~150% for 30 sec ; >150% for 200ms |
| Short Circuit Protection |
Line Mode |
Circuit Breaker |
| Battery Mode |
Electronic Circuit |
| TRANSFER TIME |
| Typical |
< 8 ms. |
| Battery Voltage |
24Vdc |
48Vdc |
| Backup Time |
Depends on system load and battery capacity (Base on the batteries connected) |
| Selectable Charging Current |
Yes |
| DISPLAY |
| LCD |
UPS status, I/P&O/P Voltage Frequency, Load Level, Battery Voltage & Level, Temperature, Model |
| LED |
Normal (Green), Warning (Amber), Fault (Red) |
| AUDIBLE ALARM |
| Battery Mode |
Beeping every 4 seconds |
| Low Battery |
Beeping every second |
| UPS Fault |
Beeping continuously |
| Overload |
Beeping twice per second |
| ENVIRONMENT |
| Operation Temperature |
0-40°C ; 32-104°F |
| Relative Humidity |
0-95% non-condensing |
| Audible Noise |
Less than 55dBA (at 1M) |
| PHYSICAL |
| Weight (Net / Gross Weight) |
49.2kgs / 63kgs |
51.4kgs / 66.6kgs |
53.6kgs / 67.7kgs |
| Dimensions (W×H×D) |
415×600×260mm |
415×600×260mm |
415×600×260mm |
| ACCESSORY |
| RS232 or SNMP |
Optional |
Specification are subject to change without notice.
DOWNLOAD
|
